
Cross Stitch Fabric Count and Design Size
Fabric count tells you how many stitches fit in an inch, so it determines the finished size of your cross stitch pattern. A higher count makes the same chart smaller; a lower count makes it larger.
What 11, 14, 16 and 18 count mean
On Aida, the count is the number of stitches per inch. 11 count has 11 stitches per inch, 14 count has 14, 16 count has 16, and 18 count has 18. In metric terms, those counts are 43.3, 55.1, 63 and 70.9 stitches per 10 cm, respectively. The count changes the size of the finished design, but it does not change the chart’s stitch dimensions. Choose a count you can see and work comfortably, then use it to estimate how much fabric the chart will cover.
Evenweave and linen over two
Evenweave and linen are often stitched over two threads. Counts 25, 28 and 32 are usually worked this way, so you skip over one fabric thread for each stitch. That makes 28 count over two equal to 14 stitches per inch. When comparing fabric sizes, use the effective stitch count after accounting for over two, rather than treating the fabric count as the number of stitches per inch. Check your fabric and stitching method before calculating the finished size, since the count alone does not tell you whether you plan to stitch over one thread or two.
Estimate the stitched area
To find the width in inches, divide the chart’s stitch width by the fabric’s stitches per inch. For a design 100 stitches wide, the results are 9.1 in on 11 count, 7.1 in on 14 count, 6.3 in on 16 count, and 5.6 in on 18 count. The chart stays 100 stitches wide on each fabric; only the physical size changes. Use the same method for the height, with the chart’s stitch height. If you stitch evenweave or linen over two, use the effective count for the calculation.
Allow fabric for finishing
The stitched area is smaller than the fabric piece you need. For framing or a hoop, add about 3 in of fabric on every side. Add that allowance to both the width and height of your design before cutting, so the fabric extends beyond the stitched area for finishing. If you have not chosen a fabric yet, compare the calculated design sizes at the counts you are considering, then make sure the piece includes this extra fabric. The pattern maker can help you make a chart and work out its size.